Repetition velocity as a measure of loading intensity in the free weight and Smith machine Bulgarian split squat
This study investigated the grouped and individualized load-velocity profile (GLVP vs. ILVP) in Bulgarian split squat using Smith machine and free weight. Seventy five recreational male lifters completed two incremental loading tests of Bulgarian split squat. Mean velocity was measured by a linear-position transducer (GymAware). Linear regression equation was applied to construct the GLVP and ILVP. The agreement of predicted %1RM and measured %1RM was assessed by a combination of intraclass correlation coefficient (ICC), coefficient of variation (CV), standard error of measurement (SEM) and Bland-Altman analysis. Acceptable validity was defined as ICC > 0.75, CV ≤ 10% and p ≥ 0.05 (a paired Wilcoxon signed-rank test). A very high level of inverse load-velocity relationships were demonstrated in Bulgarian split squat (r = − 0.92) with free weights and a Smith machine. ILVP (ICC ≥ 0.98, CV ≤ 8.73%, p ≥ 0.56) was valid enough to predict the %1RM, but GLVP of both limbs revealed large CVs in free weights (CV: 15.4%,15.63%) and a Smith machine (CV: 11.24%, 12.25%). Cross-validation between the actual %1RM and predicted %1RM using free weights and a Smith machine ILVP was not acceptable (p ≤ 0.03, CV ≥ 14.07%). A very high level of inverse relationship were observed between %1RM and MV in Bulgarian split squat using free weights and a Smith machine, indicating individualized load velocity properties, and the ILVP showed high between-devices variability in both scenarios. Using velocity as a measure of loading intensity in Bulgarian split squat needs to consider the individualized load velocity properties, and difference between free weights and a Smith machine.
Liao et al. (2023) Repetition velocity as a measure of loading intensity in the free weight and Smith machine Bulgarian split squat. PeerJ 11:e15863 https://doi.org/10.7717/peerj.15863
Parent perceptions regarding virtual pediatric dental clinics during COVID-19 pandemic: a cross-sectional study
Objective To assess the attitudes and responses of parents of pediatric patients towards virtual dental clinics during COVID-19. Material and Method A total of 102 parents of pediatric patients who were scheduled for virtual (video or telephonic) clinic appointments for new patient consultations and follow-up clinics were included in the study. Parents and patients could attend the virtual clinic from a personal computer, tablet, or smartphone. An electronic self-administered questionnaire was sent to the parents through email after consultation (video or telephonic) which consisted of demographic data and a ten-item, five-point Likert-scale assessing: (i) parent satisfaction; (ii) ease of use; (iii) the effectiveness including increasing access to clinical services; (iv) reliability of the teledentistry system and (v) usefulness for patients. Statistical analyses used were t-test, one-way ANOVA test, Shapiro–Wilk and histogram. Result Out of 102 parents, 52 attended video clinics and 50 attended the telephonic clinic. The majority of the parents were between 30–39 years of age, and about 73% had no previous experience with either virtual or telephonic consultation. Ninety-four percent of parents were satisfied with vide clinic consultation, and most of them agreed that accessing clinical services through a video clinic was easy to understand, comfortable, and time-saving. The majority of the parents (94%) agreed and strongly agreed that they will use video clinics again in the future for consultation. Conclusion Parents’ response to the use of virtual clinics for pediatric dentistry during COVID was positive. The majority of the parents stated that they would consider using teledentistry for future consultation.
Alghamdi (2023) Parent perceptions regarding virtual pediatric dental clinics during COVID-19 pandemic: a cross-sectional study. PeerJ 11:e15289 https://doi.org/10.7717/peerj.15289
Chemical diversity and antifouling activity of geniculate calcareous algae (Corallinales, Rhodophyta) from Brazil
Marine biofouling is a natural process by which many organisms colonize and grow in submerged structures, causing serious economic consequences for the maritime industry. Geniculate calcareous algae (GCA; Corallinales, Rhodophyta) produce bioactive secondary metabolites and are a promise for new antifouling compounds. Here, we investigated the antifouling activity of four GCA species—Amphiroa beauvoisii, Jania sagittata (formerly Cheilosporum sagittatum), Jania crassa, and Jania prolifera (formerly Amphiroa flabellata)—from the Brazilian coast against macro- and microorganisms. Simultaneously, metabolomic tools were applied to assess the chemical profiles of these seaweeds using gas chromatography coupled to mass spectrometry (GC-MS). Data analysis by principal component and molecular networking analyses used the global natural products social molecular networking platform (GNPS). Our results showed that all extracts were active against different strains of marine bacteria and that the J. sagittata (JsSI) extract showed the highest percentage of bacterial inhibition. The J. sagittata (JsSI) extract was the most active against the mussel Perna perna, showing 100% byssus inhibition. Regarding toxicity, only the J. crassa (JcP) extract showed a 20% mortality rate. The chemical profiles of the evaluated GCA extracts differed qualitatively and quantitatively. Yet, the steroid (3β)-cholest-5-en-3-ol was the major compound commonly identified in all extracts, with the exception of J. sagittata (JsSI). Moreover, we observed intra- and interspecific chemical variabilities among GCA extracts for the different populations, which could explain their antifouling activity variability. This study contributed new information about the chemical compounds produced by this group of seaweeds and showed its antifouling potential. These GCA species may be the subject of future studies to obtain new bioactive compounds with biotechnological potential in maritime areas.
Oliveira et al. (2023) Chemical diversity and antifouling activity of geniculate calcareous algae (Corallinales, Rhodophyta) from Brazil. PeerJ 11:e15731 https://doi.org/10.7717/peerj.15731
Green inspired synthesis of zinc oxide nanoparticles using Silybum marianum (milk thistle) extract and evaluation of their potential pesticidal and phytopathogens activities
Background The green approaches for the synthesis of nanoparticles are gaining significant importance because of their high productivity, purity, low cost, biocompatibility, and environmental friendliness. Methods The aim of the current study is the green synthesis of zinc oxide nanoparticles (ZnO-NPs) using seed extracts of Silybum marianum, which acts as a reducing and stabilizing agent. central composite design (CCD) of response surface methodology (RSM) optimized synthesis parameters (temperature, pH, reaction time, plant extract, and salt concentration) for controlled size, stability, and maximum yields of ZnO-NPs. Green synthesized ZnO-NPs was characterized using UV-visible spectroscopy and Zetasizer analyses. Results The Zetasizer confirmed that green synthesized ZnO-NPs were 51.80 nm in size and monodispersed in nature. The UV-visible results revealed a large band gap energy in the visible region at 360.5 nm wavelength. The bioactivities of green synthesized ZnO-NPs, including antifungal, antibacterial, and pesticidal, were also evaluated. Data analysis confirmed that these activities were concentration dependent. Bio-synthesized ZnO-NPs showed higher mortality towards Tribolium castaneum of about 78 ± 0.57% after 72 h observation as compared to Sitophilus oryzae, which only displayed 74 ± 0.57% at the same concentration and time intervals. Plant-mediated ZnO-NPs also showed high potential against pathogenic gram-positive bacteria (Clavibacter michiganensis), gram-negative bacteria (Pseudomonas syringae), and two fungal strains such as Fusarium oxysporum, and Aspergillums niger with inhibition zones of 18 ± 0.4, 25 ± 0.4, 21 ± 0.57, and 19 ± 0.4 mm, respectively. Conclusion The results of this study showed that Silybum marianum-based ZnO-NPs are cost-effective and efficient against crop pests.
Jahan et al. (2023) Green inspired synthesis of zinc oxide nanoparticles using Silybum marianum (milk thistle) extract and evaluation of their potential pesticidal and phytopathogens activities. PeerJ 11:e15743 https://doi.org/10.7717/peerj.15743
Lethal and sublethal effects of flubendiamide and spirotetramat against the leaf worm, Spodoptera litura(Fabricius) under laboratory conditions
The leaf worm, Spodoptera litura (Fabricius) (Lepidoptera: Noctuidae) is a notorious insect pest of many economically important cultivated crops like cotton, maize, tobocco and vegetables causing severe economic losses from 50–100%. In most crops, damage arises due to voracious feeding by the larvae and leads to the skeletonizing of leaves. Toxicological studies were performed to estimate lethal and sublethal levels of flubendiamide and spirotetramat against S. litura. Effects of these estimated values were assessed on different biological traits of S. litura including life duration, survival and next generation potential. Both flubendiamide and spirotetramat showed toxic responses against second instar larvae of S. litura under laboratory conditions. Larval duration and survival rate of S. litura to were significantly different. Exposure to test insecticides resulted in negative effect on the demography of S. litura as longer life cycle and decreased fecundity. Changes in net reproductive rate and intrinsic rate of increase also helped to decide the fate of these insecticides. Low reproductive potential and low hatching percentage due to exposure to test insecticides can help to manage next generation of target pest. These two new chemistry insecticides can be recommended for their effective and long-term utilization against this important leaf feeder which may help its management and decrease economic losses faced by the growers. Their impact on larval duration and low survival rate at lethal levels guides about their potential in pest control.
un-Nisa et al. (2023) Lethal and sublethal effects of flubendiamide and spirotetramat against the leaf worm, Spodoptera litura(Fabricius) under laboratory conditions. PeerJ 11:e15745 https://doi.org/10.7717/peerj.15745
Response surface methodology for the mixed fungal fermentation of Codonopsis pilosula straw using Trichoderma reesei and Coprinus comatus
The objective of this study was to investigate the cellulose degradation rate (CDR) and lignin degradation rate (LDR) of Codonopsis pilosula straw (CPS) and the optimal fermentation parameters for mixed fungal fermentation. Single-factor tests were used to study the effects of the fungal ratio (Trichoderma reesei: Coprinus comatus), fungal inoculum, corn flour content, and fermentation time on the degradation rate of cellulose and lignin. Based on the results of this experiment, the optimal fermentation factors were identified, and the effects of various factors and their interactions on the degradation rates of cellulose and lignin were further evaluated using the response surface method. The quadratic polynomial mathematical model of degradation rates of the cellulose and lignin in CPS by mixed fungus fermentation was established using Design Expert software v8.0.6. Under the optimal parameters for fungal fermentation of CPS straw (fungal ratio 4:6, fungal inoculum 8%, corn flour content 10%, fermentation time of 15 d), the CDR and LDR reached 13.65% and 10.73%, respectively. Collectively, the mixed fungal fermentation of CPS resulted in decreased lignin and cellulose content, better retention of nutrients, and enhanced fermentation quality. The results of this study indicate that fermentation using Trichoderma reesei and Coprinus comatus is a productive method for straw degradation, providing a theoretical basis for the development of CPS as feed.
Wei et al. (2023) Response surface methodology for the mixed fungal fermentation of Codonopsis pilosula straw using Trichoderma reesei and Coprinus comatus. PeerJ 11:e15757 https://doi.org/10.7717/peerj.15757
Tailored modulation of S100A1 and RASSF8 expression by butanediamide augments healing of rotator cuff tears
Objectives This investigation sought to elucidate promising treatment modalities for rotator cuff tears (RCTs) by delving into the molecular machinations instigating the affliction. The focus was on differentially expressed genes (DEGs) linked to RCTs, and the exploration of their roles and operative pathways. Methods DEGs were discerned from GEO datasets, followed by the establishment of a protein-protein interaction (PPI) network. Subsequently, the network’s core genes were determined employing a Venn diagram. Enrichment analysis facilitated the unveiling of the biological roles and signal transduction pathways of these pivotal genes, thus shedding light on molecular strategies for RCT-targeted treatment. The Discovery Studio 2019 software was employed to sift through FDA-sanctioned drugs targeting these essential proteins. Moreover, the efficaciousness of these FDA-endorsed drugs vis-à-vis RCTs was corroborated by the construction of an in vivo animal model of the injury and the in vitro cultivation of tendon-derived stem cells. Results Bioinformatics outcomes revealed a significant overexpression of S100A1 and RASSF8 in RCT patients. The FDA drug repository indicated that Butanediamide has a selective affinity for S100A1 and RASSF8. Subsequent in vivo and in vitro experimentation demonstrated that Butanediamide could suppress S100A1 expression and bolster TDSC proliferation, thereby facilitating RCT healing. Conclusions S100A1 and RASSF8 are pivotal genes implicated in RCTs, and their roles have been elucidated. The FDA-approved compound, Butanediamide, may represent a prospective therapeutic agent for RCTs by targeting S100A1 and RASSF8, respectively.
Lin et al. (2023) Tailored modulation of S100A1 and RASSF8 expression by butanediamide augments healing of rotator cuff tears. PeerJ 11:e15791 https://doi.org/10.7717/peerj.15791
Barley yield and malt quality affected by fall and spring planting under rainfed conditions
Background As a result of the changing climate characteristics, it is necessary to reevaluate the planting time for crop plants. The aim of the present study was to determine the quality characteristics of malting barley cultivars in fall and spring plantings. Methods Sixteen malting barley cultivars were used. Two fall-planted and two spring-planted trials were conducted in two consecutive years. The field trials were carried out in a randomized complete block design with four replications in Tokat province of Turkey under rainfed conditions. Results Grain yields varied between 4.38 and 5.71 t/ha in fall-planted trials and between 3.12 and 4.89 t/ha in spring-planted trials. Malt extracts were between 77.0% and 78.0% kg in fall-planted trials and between 73.9% and 76.9% in spring-planted trials. Alpha amylase activities ranged from 77.9 to 81.4 Ceralpha unit (CU)/g in fall-planted trials and from 80.8 to 100.9 CU/g in spring-planted trials. Diastatic power ranged from 194.5 to 331.1 Windisch-Kolbach unit (°WK) in fall-planted trials and from 129.0 to 259.8 °WK in spring-planted trials. GGE biplot analysis indicated that winter barley cultivar Durusu and facultative barley cultivar Ince-04 were the best with consistent grain yields while Ince-04 was the best with stable malt extract across the trials. In scatter plot graphics, winter barley cultivars Durusu, Aydanhanim, Yildiz and facultative Ince-04 had superior performance in fall-plantings for grain yield and malt extract. In spring planting, facultative Ince-04 had higher performance than those of other cultivars. In spring plantings, facultative or winter barley cultivars that do not have strong vernalization requirement had better yield and malt quality. Appropriate planting time and cultivars can allow a better use of available water in malt barley production under rainfed conditions. Lastly, instead of evaluating the grain yield or malt quality alone, it would be best to evaluate the target product (malt extract percentage) obtained from a particular region, process, or production methodology.
Saygili (2023) Barley yield and malt quality affected by fall and spring planting under rainfed conditions. PeerJ 11:e15802 https://doi.org/10.7717/peerj.15802
Degradation of zearalenone by microorganisms and enzymes
Mycotoxins are toxic metabolites produced by fungi that may cause serious health problems in humans and animals. Zearalenone is a secondary metabolite produced by fungi of the genus Fusarium, widely exists in animal feed and human food. One concern with the use of microbial strains and their enzyme derivatives for zearalenone degradation is the potential variability in the effectiveness of the degradation process. The efficiency of degradation may depend on various factors such as the type and concentration of zearalenone, the properties of the microbial strains and enzymes, and the environmental conditions. Therefore, it is important to carefully evaluate the efficacy of these methods under different conditions and ensure their reproducibility. Another important consideration is the safety and potential side effects of using microbial strains and enzymes for zearalenone degradation. It is necessary to evaluate the potential risks associated with the use of genetically modified microorganisms or recombinant enzymes, including their potential impact on the environment and non-target organisms. Additionally, it is important to ensure that the degradation products are indeed harmless and do not pose any health risks to humans or animals. Furthermore, while the use of microbial strains and enzymes may offer an environmentally friendly and cost-effective solution for zearalenone degradation, it is important to explore other methods such as physical or chemical treatments as well. These methods may offer complementary approaches for zearalenone detoxification, and their combination with microbial or enzyme-based methods may improve overall efficacy. Overall, the research on the biodegradation of zearalenone using microorganisms and enzyme derivatives is promising, but there are important considerations that need to be addressed to ensure the safety and effectiveness of these methods. Development of recombinant enzymes improves enzymatic detoxification of zearalenone to a non-toxic product without damaging the nutritional content. This review summarizes biodegradation of zearalenone using microorganisms and enzyme derivatives to nontoxic products. Further research is needed to fully evaluate the potential of these methods for mitigating the impact of mycotoxins in food and feed.
Gari et al. (2023) Degradation of zearalenone by microorganisms and enzymes. PeerJ 11:e15808 https://doi.org/10.7717/peerj.15808
Prevalence and virulence genes of Staphylococcus aureus from food contact surfaces in Thai restaurants
Background Staphylococcus aureus is one of the most common pathogens responsible for food poisoning due to its ability to produce staphylococcal enterotoxin (SE). S. aureus can form biofilms on the surfaces of food processing devices, enabling the distribution of SE on foods through cross-contamination events. Thailand is known for its exotic cuisine, but there is no data on the prevalence of SE-harboring S. aureus in restaurants in Thailand. Methods In this study, we conducted surface swabs on surfaces of kitchen utensil that come into contact with food and on the hands of food handlers working in restaurants in the north part of Thailand. Isolated S. aureus was investigated for biofilm formation, virulence, and SE genes. Results Two hundred S. aureus were isolated from 650 samples. The highest prevalence of S. aureus contamination was detected on the hands of food handlers (78%), followed by chopping boards (26%), plates (23%), knives (16%), spoons (13%), and glasses (5%). All of them were methicillin-sensitive S. aureus (MSSA) and the mecA gene was not present in any strains. Biofilm formation was detected using the CRA method, and 49 (24.5%) were identified as biofilm-producing strains, with the hands of food handlers identified as the primary source of biofilm-producing strains. The prevelence of biofilm-related adhesion genes detected were: icaAD (13%), fnbA (14.5%), cna (6.5%), and bap (0.5%). Two classical enterotoxin genes, sec and sed, were also found in four and six of the S. aureus isolates, respectively, from hands and utensils. Conclusion The highest prevelence of S. aureus was detected on the hands of food handlers. S. aureus strains with biofilm and enterotoxin production abilities were discovered on food contact surfaces and the hands of food handlers, implying significant risk of food contamination from these sources that could be harmful to consumers. To avoid cross-contamination of food with food contact items, the food handlers’ hands should be properly washed, and all food preparation equipment should be thoroughly cleaned.
Tasanapak et al. (2023) Prevalence and virulence genes of Staphylococcus aureus from food contact surfaces in Thai restaurants. PeerJ 11:e15824 https://doi.org/10.7717/peerj.15824